Study of haze emission efficiency based on new co-opetition data envelopment analysis

As haze intensifies in China, controlling haze emission has become the country's top priority for environmental protection. Because haze moves across different regions, it is necessary to develop a data envelopment analysis (DEA) model underpinned by both competition and cooperation to evaluate the haze emission efficiency in different provinces. This study innovatively adopts the spatial econometrics to construct the co-opetition matrices of Chinese provinces, then builds the co-opetition DEA model to evaluate the haze emission efficiency of them, and finally uses the haze data of 2015 as an example to assess the applicability of the model. The results of the study include the following: First, compared with the traditional CCR (A. Charnes & W. W. Cooper & E. Rhodes) model, this study constructs the co-opetition DEA cross-efficiency model that integrates haze's feature of cross-border moving; thus, it is more in line with the reality of haze emission and movement. Second, compared with the efficiency value gained from the CCR model, the haze emission efficiency values for Tianjin and Guangdong, two decision-making units, register greater variance when using the DEA model. The reason might lie in that they have a different spatial transportation relationship with their surrounding provinces. Third, the haze emission efficiency of provinces, according to the evaluation based on the co-opetition DEA method, varies greatly: Those with high efficiency are mostly inland provinces with slow economic growth and adverse climatic conditions, whereas many of the provinces with low efficiency are located in the relatively prosperous East China. The specific co-opetition DEA model constructed in this study enriches the research on the DEA model, which can be applied to the emission efficiency evaluation of similar pollutants around the world and can contribute empirical support to the haze reducing efforts of the government with its empirical results.     

四川盆地上三叠统划分对比研究

四川盆地上三叠统对比长期存在混乱，给盆地整体评价带来困难。通过岩石地层、地震地层、事件地层及高分辨率旋回地层等多种方法讨论了须家河组与香溪群各岩性段的对比关系，得出了全盆地上三叠统的对比关系；指出须四段底可近似看成等时界面；须家河组下部地层自西向东、向南逐层超覆在雷口坡组之上，上部地层在盆地西北部自东南向西北方向剥蚀层位渐次变老。文章建议四川盆地上三叠统废除“香溪群”，统一使用“须家河组”，以利于对全盆地上三叠统进行油气资源整体评价与深化研究。     

Revised Estimates of Dimension and Exercise Variance Components in Assessment Center Postexercise Dimension Ratings.

The authors reanalyzed assessment center (AC) multitrait-multimethod (MTMM) matrices containing correlations among postexercise dimension ratings (PEDRs) reported by F. Lievens and J. M. Conway (2001). Unlike F. Lievens and J. M. Conway, who used a correlated dimension-correlated uniqueness model, we used a different set of confirmatory-factor-analysis-based models (1-dimension-correlated Exercise and 1-dimension-correlated uniqueness models) to estimate dimension and exercise variance components in AC PEDRs. Results of reanalyses suggest that, consistent with previous narrative reviews, exercise variance components dominate over dimension variance components after all. Implications for AC construct validity and possible redirections of research on the validity of ACs are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

顶封封隔管柱的研制与应用

中原油田近年来注水压力不断升高，井况恶化严重，为此开发了顶封封隔管柱，主要阐述了管柱工况受力特点、结构、工作原理及现场使用效果。经现场较大面积的应用证明，各项性能、技术指标达到了现场要求。     

Computing surfaces invariant under subdivision

In this paper, we propose a general subdivision algorithm for generating surfaces. The algorithm has as motivation our earlier work on the design of free form curves where similar ideas were investigated. Here we describe some properties of uniform refinement algorithms for surface generation. A detail analysis of their properties will be given later by one of us.     

Axisymmetric extrusion through adaptable dies—Part 1: Flexible velocity fields and power terms

An adaptable die is one that not only produces the correct geometrical shape, but also is designed through an adaptable method to impart other desirable properties to the product or process. In this first part of a series of papers, six kinematically admissible velocity fields are developed for use in upper bound models for axisymmetric extrusion through various dies, including extrusion through adaptable dies. Three base velocity fields are presented:

(1) assuming proportional angles in the deformation zone,

(2) assuming proportional areas in the deformation zone, or

(3) assuming proportional distances from the centerline in the deformation zone.

The base velocity is modified by an additional term comprised of two functions. One function allows extra flexibility in the radial direction, and the second function allows extra flexibility in the angular direction. There are two forms of the second function, which meet the required boundary conditions. The flexibility function in the radial direction is represented by a series of Legendre polynomials, which are orthogonal over the deformation region. The power terms derived for these velocity fields for use in upper bound models are also presented.Part 2 of this series compares the results obtained in upper bound models for the six velocity fields for a spherical extrusion die. In Part 3, the use of the best velocity field for extrusion through streamlined dies is developed to determine the adaptable die shape, which minimizes the required extrusion pressure. Additionally, the adaptable die shape is compared with results from Yang and Han for arbitrarily curved and streamlined dies.     

Sensitivity analysis of the scattering parameters of microwave filters using the adjoint network method

A novel approach is presented to calculate the sensitivities of the scattering parameters of microwave filters obtained with the full‐wave mode‐matching (MM) technique. Using only the MM simulation of the original network, the sensitivities of the scattering parameters with respect to all designable parameters are obtained. The adjoint network method (ANM) is applied to the generalized scattering matrices of the different filter components. This guarantees good accuracy of the calculated sensitivities. The implementation details are discussed for N‐resonator ridge waveguide filters. Excellent agreement is obtained between the sensitivities calculated using ANM and those obtained using the expensive central differences. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

Robustness analysis of responses of vibration control structures with uncertain parameters using interval algorithm

Variations in system parameters due to uncertainties may result in system performance deterioration. Uncertainties in modeling of structures are often considered to ensure that control system is robust with respect to response errors. Hence, the uncertain concept plays an important role in vibration control of the engineering structures. The paper discusses the robustness of responses of vibration control systems with the uncertain parameters. The vibration control problem of an uncertain system is approximated by a deterministic one. The uncertain parameters are described by interval variables. The uncertain state matrix is constructed directly using system physical parameters and avoided to use bounds in Euclidean norm. The feedback gain matrix is determined based on the deterministic systems, and then it is applied to the actual uncertain systems. A method to calculate the upper and lower bounds of responses of the closed-loop system with uncertain parameters is presented. The upper bounds of responses can be used to estimate the robustness of responses of the controlled system with uncertain parameters. Two numerical examples are given to illustrate the applications of the present approach.     

Dynamic analysis and drilling degrees of freedom

Finite element methods for dynamic analysis employing elements with drilling degrees of freedom are presented. The formulation is based on a variational principle in which displacements and rotations are interpolated independently. The issue of zero masses corresponding to rotational degrees of freedom is addressed and techniques for defining consistent and lumped rotational mass matrices are presented.     

Dynamics Modelling of Hexaslides using the Decoupled Natural Orthogonal Complement Matrices

In this paper, dynamic model of a class of parallel systems, namely, the hexaslides, is proposed. The model developed is based on the concept the decoupled natural orthogonal complement (DeNOC) matrices, introduced elsewhere. The dynamic model of hexslides, though complex due to the existence of multi-loop kinematic chains, is required for actuator power estimation, computed-torque control, optimum tool trajectory generation, etc. The use of DeNOC offers many physical interpretations, recursive algorithms, and parallel computations. Using the proposed dynamic model, a parallel inverse dynamics algorithm has been presented to compute the actuator forces. This is useful to choose suitable motors for an application. An illustration is provided using an existing machine tool based on hexaslides, namely, the HexaM, while it is carrying out a circular contouring. Secondly, the effect of leg and slider inertias is also studied, which clearly suggests that neither of these can be neglected while finding the actuator forces.